Approaches to Mechanical Reduction of Dispersion in Blast Measurements Using Kolsky Bars

Report Number:
ARL-MR-1043

Publish Date:

September 30, 2021

Distribution:

Approved for public release: distribution is unlimited.


Author(s):

David Fox

Abstract:

Cylindrical Kolsky bars offer an attractive means for measuring time-varying blast pressure fields, but their accuracy is often compromised due to dispersion effects from high-frequency stresses resulting from Poisson’s effect, which propagates in the bars’ radial direction. Radial stresses distort the axial strain signal due to the inertial effects they induce in the bar’s longitudinal direction. Using appropriate bar geometry can reduce some of the inaccuracies. In addition, analytical and numerical methods have been devised that can, in some situations, improve blast measurement accuracy. Here, we demonstrate, using computational methods, the efficacy of two more direct approaches that involve applying mechanical means to suppress blast pressure signal inaccuracy. The first approach uses beryllium, which has an extremely low Poisson ratio of 0.03, as the bar material to reduce signal distortion due to dispersion. The second method uses mechanical constraint in the radial direction to suppress the noise in the pressure signal. Initial computational evaluations of this technique used an annular sheath in intimate contact with the outer radius of the bottom section of the bar. Using a Teflon sheath reduced the overprediction of peak blast pressure from a level of 12%, the baseline level for an unconfined bar, to 3%.

File Size: 2 MB
Scroll to Top

Copyright © 2026 All Rights Reserved.