An In-Depth Investigation of the Effect of Curing Temperature on Spiropyran Mechanophore Activation in Bulk PDMS under Dynamic Loading
Report Number:
ARL-TR-9306
September 27, 2021
Approved for public release: distribution is unlimited.
Author(s):
James Berry, Logan Shannahan, Stephen Craig, and Müge Fermen-Coker
Abstract:Embedded in the silicone elastomer polydimethylsiloxane (PDMS), the spiropyran mechanophore mechanochemically changes color under applied load, linking molecular-level behavior to macro-scale loading. As the spiropyran is covalently linked to the PDMS polymer chain, the mechanical properties of the silicone elastomer substrate play a large role in the material’s behavior and timing of mechanochromism. Here, the influence of the PDMS curing temperature on material behavior and mechanochromic response of the embedded spiropyran is studied under uniaxial dynamic compression at rates of 1000 s–1. Higher curing temperatures are shown to produce stiffer material, which requires increased stress to initiate color change. However, a consistent onset strain of approximately 90% is needed, regardless of stress. These results suggest activation is strain controlled, and that increasing cross-linking density, coupled with the corresponding reduction in stretchability, increases the force required to reach a consistent activation strain.
